How To Turn An Armchair Into A Rocker
One for the right and one for the left here you can see my supports in place and the top of my swivel rocker base before it was attached.
How to turn an armchair into a rocker. What makes the process difficult is measuring the wood correctly so that both rockers are identical. Some recliners have a lever that allow you to adjust how far the recliner will rock but they do not offer an on off switch that allows you to turn off the rocking mechanism completely similar to ones located on office chairs. If they appear stuck cover the legs with a protective scrap of piece of plastic something that won t dent the wood and tap with a hammer. Come to find out converting a chair into a rocking chair is pretty straight forward.
Ektorp jennylund chair swivel rocker base and hardware a 2 4 a 1 2 a piece of 3 4 plywood scissors wood screws description. Turn a chair into a rocking chair. Whether a glider in the nursery is essential or not is a personal choice. Chairs of different styles and ages will be manufactured differently.
We did quite a bit of research and used the formula below to determine the radius. The hinges enable the recliner to rock back and forth. First of all they are expensive. Step 2 expose the underside frame of the recliner.
To start the rocking chair base build we first tested the rocker radius on our upholstered chair by cutting a 38 inch radius from two scrap sheets of masonite and screwing the masonite rockers into the stock legs. Even if we were able to find one we liked for cheap it probably wouldn t fit in our itty bitty. Converting a regular chair into a rocker is a surprisingly tricky process. What is well settled is that good looking gliders can often blow your nursery budget.
I slipped them into the frame and drilled a few screws upwards through the chair frame and into my new 2 x 4 supports. Dina of honey and fitz converted her vintage upholstered chair into a functional. Use pliers to remove tacks and staples. Converting an ordinary chair into a rocking chair can be done in a few different ways depending on what type of rocker you want to create.
This style of rockers is designed to attach to a chair that has four bottom legs like many dining chairs. Secondly they are almost always huge. Drill through the swivel base into the blocking or plywood. Try wiggling the legs to see if they will come out of the sockets.
The frame of your rocker recliner attaches to a hinged box. There is a lot of measuring involved that is time consuming. We had searched tirelessly for a rocker or glider to put in our baby s room. The rocker legs fit into sockets under the chair underneath look for screws and or nails they need to come out.
While conversion kits are available designing your own conversion kit is the most personally rewarding way to go. Take matters into your own hands and convert a chair you already own that s right you can make your own glider by converting an upholstered chair. This post contains affiliate links to products i know or love first you will need to locate some runners. Let me break it down for you.